Buying guideBuying advice

How to choose the right bike size

Why the size chart is only a starting point, what stack and reach mean, and how to set your saddle height once the bike arrives.

A blue bike with a brown saddle leaning against a metal railing
Photo: Caesar Aldhela on Unsplash

Some links on this page are affiliate links. If you buy through one we may earn a small commission, at no extra cost to you. It never changes how we rank. How we make money.

A bike that fits feels comfortable, handles well and lets you ride further. A bike that does not fit can cause aches in your back, neck, hands and knees, however good it is. Getting the size right is the most important part of buying a bike.

Why size charts are only a start

Every brand publishes a size chart based on rider height. They are useful for narrowing it down, but two riders of the same height can have very different leg lengths, arm lengths and flexibility. And sizes are not consistent between brands. One brand’s medium might fit like another brand’s small.

So use the chart to find your likely size, then check the geometry.

Stack and reach

Most brands publish a geometry chart for each bike. Two numbers on it are the most useful for comparing fit:

  • Stack is how tall the front of the bike is. A bigger stack means a more upright position.
  • Reach is how long the front of the bike is. A bigger reach means a more stretched-out position.

If you already have a bike that fits well, look up its stack and reach and compare with the bike you are thinking of buying. This is the most reliable way to compare sizes across brands.

Endurance bikes and hybrids tend to have more stack and less reach than race bikes, for a more upright, relaxed position.

Between sizes?

If you fall between two sizes, think about how you like to ride. If you want a more upright, comfortable position, or you are less flexible, the smaller size with a taller stem or spacers is often the better choice. A smaller frame is usually easier to adjust than a frame that is too big, and handles more nimbly too.

Standover

You should be able to stand over the top tube with both feet flat on the ground and a little clearance. This matters most on hybrids, gravel and mountain bikes, where you may need to put a foot down quickly.

Setting your saddle height

Once you have the bike, setting the saddle height correctly makes the biggest single difference to comfort and power.

A simple method:

  1. Sit on the bike, leaning against a wall, in your cycling shoes.
  2. Put your heel on the pedal at the bottom of its stroke.
  3. Raise or lower the saddle until your leg is straight with your heel on the pedal.
  4. When you pedal normally with the ball of your foot, your knee should now have a slight bend at the bottom.

If your hips rock from side to side when you pedal, the saddle is too high. If your knees feel cramped at the top of the stroke, it is probably too low. Make small changes, a few millimetres at a time.

When to get a bike fit

A professional bike fit is worth considering if you ride long distances, have any aches or pains on the bike, or are spending a lot on a new bike. Some fitters will help you choose the right size before you buy. If you use clipless pedals, a fit will also set up your cleats properly.

Buying online

If you are buying without a test ride, check the brand’s returns policy, compare stack and reach with a bike you know, and do not be afraid to ask the seller for advice on sizing. A good seller would much rather help you pick the right size than handle a return.

More from GearRatio

Further reading from around the web

Pieces we rate from other UK cycling publishers. They open on the publisher's site.