Buying guideKit

Clipless pedals and cycling shoes: a beginner's guide

What clipless pedals are, the difference between road and two-bolt systems, how to choose shoes, and how to get used to clipping in and out.

A cyclist's legs and white cycling shoes on a road, casting long shadows
Photo: Uran Wang on Unsplash

Some links on this page are affiliate links. If you buy through one we may earn a small commission, at no extra cost to you. It never changes how we rank. How we make money.

Clipless pedals hold your shoe firmly to the pedal. The name is confusing, because you clip in. It comes from the old toe clips and straps they replaced. Most keen riders use them, because they keep your foot in the right place and make pedalling feel smoother and more efficient.

How they work

A metal or plastic cleat bolts to the sole of your cycling shoe. You push the cleat into the pedal and it clicks in. To unclip, you twist your heel outwards. It quickly becomes second nature.

Most systems allow a little “float”, meaning your foot can rotate slightly while clipped in. This is kinder to your knees.

Two-bolt or three-bolt

Two-bolt systems (often called SPD-style) use a small cleat that sits recessed inside the sole of the shoe. You can walk normally in them. They suit commuting, touring, gravel riding, mountain biking and new riders. Many pedals are double-sided, so they are easy to clip into.

Three-bolt road systems use a larger cleat that sticks out from the sole. They spread the pressure over a bigger area and feel very solid, which road riders like for long, hard efforts. But walking in them is awkward and slippery, and the cleats wear when you walk on them.

For most new riders, two-bolt is the better starting point.

Choosing shoes

Make sure the shoe matches the cleat system you choose. Most road shoes are made for three-bolt cleats, and most mountain bike, gravel and commuting shoes for two-bolt. Some take both.

Stiffness. Stiffer soles transfer power better and stop your foot aching on long rides. Very stiff carbon soles suit racing. Slightly flexible soles are more comfortable to walk in.

Fit. Your shoes should be snug with no heel lift, but leave room to wiggle your toes. Feet swell on long rides and in warm weather. Try shoes on later in the day if you can.

Fastening. Dials are quick and easy to adjust on the move. Laces are light and give an even fit. Velcro is simple and cheap.

Getting started

  1. Set the release tension low. Most pedals have a small screw to adjust how hard it is to unclip. Start at the easiest setting.
  2. Practise somewhere quiet. Lean against a wall or hold onto a railing and practise clipping in and out on each side.
  3. Unclip early. When you approach a junction or traffic lights, unclip one foot well before you need to stop.
  4. Pick a favourite foot. Most riders always unclip the same foot first. It helps to make it a habit.

Almost every rider falls over at a standstill at least once while getting used to clipless pedals. It is embarrassing rather than dangerous, and it rarely happens twice.

Setting up the cleats

Cleat position affects comfort and can cause knee pain if it is badly set. As a starting point, line up the cleat so the ball of your foot sits over the pedal axle, and so your foot points the way it naturally does when you walk. If you get any knee pain, a professional bike fit is worth the money. See our guide to getting the right bike size for more on fit.

More from GearRatio

Further reading from around the web

Pieces we rate from other UK cycling publishers. They open on the publisher's site.