Buying guideKit

Road and gravel tyres: width, pressure and whether to go tubeless

How to choose tyres for a road or gravel bike, why wider is often faster, how to set your pressure and whether tubeless is worth it.

A red and white bike tyre against a turquoise wall
Photo: Alessandra Caretto on Unsplash

Some links on this page are affiliate links. If you buy through one we may earn a small commission, at no extra cost to you. It never changes how we rank. How we make money.

Tyres are the only part of your bike that touches the road. They affect speed, comfort, grip and how often you have to fix a puncture. They are also one of the cheapest upgrades that makes a big difference.

Why wider tyres took over

Road riders used to run narrow tyres pumped up very hard, believing that was fastest. Testing has since shown that on real roads, with all their bumps and cracks, a wider tyre at a lower pressure often rolls just as fast or faster. It also grips better and is far more comfortable.

That is why most road bikes now come with 28mm tyres, and many take 32mm or more. Gravel bikes typically use tyres between about 38mm and 50mm.

Before buying wider tyres, check how much room your frame and fork have. You need some clearance around the tyre for mud and for the wheel to flex.

Choosing a road tyre

Fast or tough. Race tyres are light and supple, and roll fast, but puncture more easily and wear quicker. Training and winter tyres have more puncture protection and last longer, at the cost of a little speed.

Rubber compound. Softer compounds grip better, especially in the wet, but wear faster.

Width. For most riders, 28mm to 32mm is the sweet spot. Go wider if your roads are rough and your frame allows.

Choosing a gravel tyre

Tread. Smooth or lightly treaded tyres are fast on hard-packed gravel and roads. Chunkier knobs grip better in mud and loose ground. Many riders choose a tyre with a smooth centre and knobbly edges, which rolls well but still grips in corners.

Width. Wider tyres give more grip and comfort on rough ground. If you ride lots of tarmac to reach the trails, a slightly narrower tyre will feel quicker.

Getting the pressure right

The right pressure depends on your weight (with the bike and kit), your tyre width and the surface. Wider tyres need less pressure. Heavier riders need more. Rough roads and gravel suit lower pressures than smooth tarmac.

Too hard and the bike feels harsh and skittish, and can actually be slower over bumps. Too soft and the tyre feels vague, and you risk pinch punctures on tubes or damaging the rim. Many tyre makers publish pressure calculators, which are a good starting point. Check your pressure weekly, as tyres lose air over time.

Tubes or tubeless

Inner tubes are simple, cheap and easy to fix at the roadside. Good modern lightweight tubes can make a tyre feel faster.

Tubeless tyres seal directly onto the rim with liquid sealant inside. Small punctures usually seal on their own, often without you noticing. You can also run lower pressures without the risk of pinch flats. The downsides are messier fitting, topping up the sealant every few months, and roadside repairs that can be fiddly when a hole is too big to seal. Many riders carry a tubeless plug kit and a spare tube just in case.

For gravel riding, tubeless is close to essential. For road riding, it is a matter of preference.

When to replace your tyres

Replace tyres when the tread is worn flat or squared off, when you can see the casing threads through the rubber, when there are deep cuts, or when you start getting more punctures than usual. Many tyres have small wear indicators moulded into the tread.

More from GearRatio

Further reading from around the web

Pieces we rate from other UK cycling publishers. They open on the publisher's site.