Buying guideKit

Bike lights guide: what the law says and what you actually need

The UK rules on bike lights and reflectors, the difference between lights to see and lights to be seen, and how to choose a set.

A cyclist riding along a city street at night
Photo: Daniel Radu on Unsplash

Some links on this page are affiliate links. If you buy through one we may earn a small commission, at no extra cost to you. It never changes how we rank. How we make money.

Good lights keep you safe and keep you legal. With darker evenings for half the year in the UK, they are one of the most important things you can buy for your bike.

What the law says

Between sunset and sunrise, UK law says a bike ridden on the road must have:

  • a white front light,
  • a red rear light,
  • a red rear reflector,
  • amber reflectors on the front and back of each pedal (on bikes made after 1985).

Flashing lights are allowed, as long as they flash at a steady rate. Many riders use a steady light on the front and a flashing one on the back, or one of each on the back.

Lights to be seen, and lights to see by

Lights to be seen make sure drivers and other riders notice you. They are usually smaller, lighter and cheaper, and are fine if you only ride on lit streets.

Lights to see by throw enough light onto the road ahead for you to spot potholes and edges on unlit roads and paths. You need these for country lanes, towpaths and anywhere without street lights.

How bright is bright enough?

Brightness is measured in lumens. As a rough guide:

  • for town riding on lit streets, a modest front light is enough to be seen,
  • for unlit roads, you will want a much brighter front light with a proper beam,
  • for fast riding or trails in the dark, brighter again.

But the number on the box is not everything. A light with a well-shaped beam, which puts the light on the road and not into the eyes of oncoming drivers, can be more useful than a brighter light with a poor beam. Some lights are designed to meet German road standards, with a cut-off beam like a car’s dipped headlights. They are very considerate of other road users.

What to look for

Run time. Check how long the light lasts on the setting you will use most, not just the lowest. Make sure it will last your longest ride, with some to spare.

Charging. Most lights now charge by USB-C. Some show how much battery is left, which saves being caught out.

Mounts. A secure mount that is easy to fit and remove matters, especially if you lock your bike in town and take the lights with you.

Side visibility. Lights that can be seen from the side help at junctions and roundabouts.

Weatherproofing. British weather is hard on lights. Look for a good water resistance rating.

Daytime running lights

More and more riders use a flashing rear light in the daytime, and a front light too. It makes you noticeably easier to spot, particularly on overcast days, in shade and in rain.

Be seen in other ways

Lights work best alongside reflective details on your clothing, shoes and bags. Moving reflectors on your ankles or pedals are especially eye-catching, because drivers recognise the movement as a cyclist. See our winter cycling clothing guide for more.

More from GearRatio

Further reading from around the web

Pieces we rate from other UK cycling publishers. They open on the publisher's site.