Buying guideMaintenance

Basic bike maintenance: the five-minute checks that save you money

Simple checks and jobs anyone can do at home to keep a bike safe, quiet and running well, plus when to hand it to a mechanic.

A man working on a bike in a home garage
Photo: Anton Savinov on Unsplash

Some links on this page are affiliate links. If you buy through one we may earn a small commission, at no extra cost to you. It never changes how we rank. How we make money.

You do not need to be a mechanic to keep your bike in good shape. A few simple checks and jobs will keep it safe, make it ride better and save you money on repairs.

The quick check before every ride

Many riders use the “ABC” check:

A is for air. Squeeze the tyres. Are they firm? Check the pressure with a pump gauge at least once a week. Look for cuts, glass or bald patches. Our tyres guide explains how to set your pressure.

B is for brakes. Pull both brake levers. They should feel firm and stop well before they touch the handlebars. Look at the brake pads for wear.

C is for chain. Is it clean and lightly oiled, or dry, rusty or caked in grime? Spin the pedals backwards and listen for squeaks.

Then give the bike a quick look over. Check the quick-release levers or thru-axles are tight, and that nothing is loose or rattling.

Cleaning and lubing your chain

A clean, lubricated chain shifts better, runs quieter and lasts much longer. It also protects the expensive parts it runs on.

  1. Wipe the chain with a rag while you spin the pedals backwards.
  2. If it is very dirty, use a chain cleaner or degreaser, then rinse and dry it.
  3. Apply a drop of lube to each link while turning the pedals backwards.
  4. Leave it a few minutes, then wipe off the excess. Lube belongs inside the chain, not on the outside where it collects dirt.

Use a wet lube in winter and rain, and a dry lube in summer. In winter, clean and lube more often, because grit and road salt are very hard on the drivetrain. Our winter cycling guide has more on riding through the colder months.

Checking chain wear

Chains stretch as they wear. A worn chain wears out the cassette and chainrings too, which are much more expensive to replace. A cheap chain wear checker tells you when it is time for a new chain. Check it every few hundred miles.

Brake pads

Disc brake pads should be replaced when the pad material is down to about a millimetre. Rim brake pads usually have wear lines or grooves. When they disappear, replace the pads. Wet, gritty winter riding wears pads much faster.

Keeping the bike clean

Wash your bike with warm, soapy water and a soft brush, then rinse and dry it. Avoid blasting the bearings with a pressure washer. A clean bike is easier to check for damage and wear, and parts last longer.

Your first service

New bikes need a check after a few weeks of riding. Gear and brake cables stretch and settle in, and bolts can need re-tightening. Many shops and brands include this first service for free, so check before you pay.

When to see a mechanic

Some jobs need special tools or experience. Take your bike to a mechanic if:

  • the gears will not index properly after a small adjustment,
  • the brakes feel spongy, especially hydraulic discs,
  • you hear creaks or knocks you cannot track down,
  • wheels are buckled or spokes are loose,
  • you are not confident a repair is safe.

A full service once or twice a year is a good habit, especially if you ride through winter.

A basic toolkit

To do most of the jobs above, you need:

  • a track pump with a gauge,
  • a set of hex keys (Allen keys),
  • tyre levers and a puncture repair kit or spare tube,
  • chain lube, a rag and a brush,
  • a chain wear checker.

More from GearRatio

Further reading from around the web

Pieces we rate from other UK cycling publishers. They open on the publisher's site.